117
APPENDIX
01. Power k a 00 ~01
02. Aspect Ratio k c Refer to p. 118
03. Screen Mute k d Refer to p. 118
04. Volume Mute k e 00 ~01
05. Volume Control k f 00 ~64
06. Contrast k g 00 ~64
07. Brightness k h 00 ~64
08. Colour k i 00 ~64
09. Tint k j 00 ~64
10. Sharpness k k 00 ~64
11. OSD Select k l 00 ~01
12.
Remote control lock mode
k m 00 ~01
13. Treble k r 00 ~64
14. Bass k s 00 ~64
15. Balance k t 00 ~64
16.
Colour Temperature
k u 00 ~02
17. Abnormal Status k z FF
18. ISM Method j p Refer to p. 120
19.
Energy Saving
j q Refer to p. 120
20. Auto Configuration j u 01
21. Tune Command m a Refer to p. 120
22. Channel Add/Skip m b 00 ~01
23. Key m c Sende IR-kode
24.Input select (Main) x b Refer to p. 121
Communication Parameters
ABaud rate : 9600 bps (UART)
AData length : 8 bits
AParity : None
AStop bit : 1 bit
ACommunication code : ASCII code
AUse a crossed (reverse) cable.
Transmission
* [Command 1] : First command to control the TV.
(j, k, m or x)
* [Command 2] : Second command to control the TV.
* [Set ID] : You can adjust the set ID to choose
desired monitor ID number in option
menu. Adjustment range is 1 ~99.
When selecting Set ID ‘0’, every connect-
ed set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
* [DATA] : To transmit command data.
Transmit ‘FF’ data to read status of com-
mand.
* [Cr] : Carriage Return
ASCII code ‘0x0D’
* [ ] : ASCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The set transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is data read mode, it indicates present status
data. If the data is data write mode, it returns the
data of the PC computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The set transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
non-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving Protocol
Command Reference List
Data 00: Illegal Code
COMMAND
1
COMMAND
2
DATA
(Hexadecimal)
*When setting the 17 ~24, a menu does not appear on
screen.
* Note: During USB operations such as Dvix or EMF, all
commands except Power (ka) and Key (mc) are not exe-
cuted and treated as NG.
Downloaded From TV-Manual.com Manuals