8
PREPARATION
PREPARATION
BACK COVER FOR
WIRE ARRANGEMENT
■
Image shown may differ from your TV.
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
STAND INSTALLATION
1
2
3
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the
back of the TV.
■Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection
cover. Insert the PPRROOTTEECCTTIIOONN CCOOVVEERRinto the TV
until clicking sound.
NOT USING THE DESK-TYPE STAND
protection cover
CABLE HOLDER
4 inches
4 inches 4 inches 4 inches
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4”
(10cm) all around the TV.
GGWhen assembling the
stand, make sure to dis-
tinguish and assemble
the front and rear side of
the stand correctly.
NOTE
!
FRONT
■
Image shown may differ from your TV.
■
When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tight-
ened fully, the product can tilt forward after the
product installation.) If you tighten the bolt with
excessive force, the bolt can deviate from abrasion
of the tightening part of the bolt.
Only 60PS40**
Install the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPPas shown.
CABLE
MANAGE-
MENT CLIP
Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPPwith both
hands and pull it upward.
How to remove the cable management clip
NOTE
!
GGDo not use the CABLE MANAGEMENT CLIP to
lift the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
(Except for 60PS40**)
Downloaded From TV-Manual.com Manuals