IP Environment Setup (Cont.)

(Continued from previous page)

Note: Setting the Media Type to “IP” automatically sets the Data Channel field to “253.” You cannot alter this setting (unless you revert Media Type to “RF”). Also, it is not possible to direct enter “253” in the Data Channel field.

b)In the Server IP and Port Number fields, either key in or use the Left/Right arrow keys to select the appropriate values for the Pro:Centric server IP address and port number. The IP address must match the IPv4 multicast address and the port number must match the port number that is set in the Pro:Centric server.

Note: If the server IP address and port number have already been set in the Automated Installation Routine Wizard, the specified data will be reflected in these fields.

Pro:Centric Application Mode Configuration

In the Mode field, use the Left/Right arrow keys to select the appropriate Pro:Centric Application Mode setting—Off, FLASH, GEM, or HTML. If the Pro:Centric Mode is set to “Off,” Pro:Centric application data will not be downloaded.

Note: If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in the EZ-Manager Wizard, the specified mode will be reflected in this field. If you change the mode in this menu, Installer Menu item 098 will now reflect the value you selected here.

3.In the Update Event field, use the Left/Right arrow keys to select On or Off, as required. The Wake For Update feature uses a timer, based on the Update Time settings to wake the TV to check for, and if applicable, download updates. See Installer Menu item 121 UPDATE TIME HR description on page 30 for additional information on Wake For Update functionality. If you set Update Event to “On,” specify the appropriate Wake For Update time in the Update Time fields, as desired (see also item 121 description). Note that the Update time set in this menu is based on a 12-hour clock. Ensure the AM/PM specification is set accordingly.

4.Once all fields are completed as required, either select Close and then press OK on the Installer Remote or press to return to the IP Environment Menu.

Wake On LAN Setup

The Wake On LAN feature enables the TV to receive software updates and/or be powered ON upon receipt of Wake Up Frame packets and/or Magic Packet data via the wired LAN. To facilitate use of this feature, note that the appropriate wired connection must be made to the TV. This menu option enables you to specify Wake On LAN parameters.

1.With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select Wake On LAN. Then, press OK.

2.In the Wake On LAN pop-up window, use the Up/Down arrow keys on the Installer Remote to navigate between fields, and use the Left/Right arrow keys to select the appropriate value— Disabled, Update, or Power ON—for each parameter.

3.Once all fields are completed as required, either select Close and then press OK on the Installer Remote, or press to return to the IP Environment Menu.

 

 

 

IP Environment

Move

OK

 

 

 

 

 

• Network ConnectionWOL (Wake Up Frame)

 

 

 

 

 

 

 

 

 

 

<

Disabled

>

 

 

 

 

 

• Network StatusWOL (Magic Packet)

 

 

 

 

 

 

 

 

 

 

<

Disabled

>

 

 

 

• IP Stream Control

 

 

 

 

 

 

 

 

 

• Pro:Centric

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Wake On LAN

 

 

 

 

 

 

 

 

 

• Media Share

 

 

 

 

 

 

 

 

 

• Pre-loaded Apps

 

 

 

 

 

 

Close

206-4234

61