Configure Pro:Centric Settings
Once you select “Next” from the TV Configuration Options screen, the Searching for Pro:Centric Server screen is displayed (see example at right), and you have the following options:
•You can allow the
Continue with the “Automated Pro:Centric Configuration” sub- section below.
•If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need to be configured in order for the TV to connect to the Pro:Centric server and/or if the Pro:Centric server is not yet installed, you may expedite the setup process by entering this data manually.
Continue with the “Manual Pro:Centric Configuration” subsection on the following page.
Automated Pro:Centric Configuration
Note: If the server is not yet configured on the system, use the manual configuration option to configure the Pro:Centric operation.
Once the RF channel used by the Pro:Centric server as its data channel is found (the Pro:Centric Server Was Found screen will be
If the process is successful, no further user interaction is required, though, in some instances, where the option (for example “Next”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process.
Note: If, after completing the search, the TV is unable to find a Pro:Centric server’s RF channel (while the Searching for Pro:Centric Server screen is on display), the wizard will stop and show a Diagnostics screen that enables you to manually return to the previous screen (to reinitiate the configuration) or exit the wizard.
When the Pro:Centric Configuration is complete, an
Note: With the
1 2 3 4
Searching for Pro:Centric Server...
It may take 1 min 32 second(s).
This step automatically searches for the Pro:Centric server.
If there is no Pro:Centric Server installed, you do not need to continue with this procedure. Please select either ‘Exit’ or ‘Manual Pro:Centric’.
Status : Tuning channel 49
TV is now searching all of the channels for the data channel...
Back |
| Exit |
| Manual Pro:Centric |
|
|
|
|
|
Note: You can select the “Back” button, where available, to check previous settings, as necessary.
1 2 3 4
Pro:Centric Server was found...
It may take 2 second(s).
The Pro:Centric data channel was found!! (Data Channel: 75, Mode: GEM) The Download window will open in 2 second(s). You may wait or select ‘Next’. Otherwise, if you select ‘Exit’, the Pro:Centric server settings can be retained and used during the next download by selecting ‘Save & Exit’ in the Exit window.
Status : Tuning channel 75
The Pro:Centric data channel is found!! (Data Channel: 75, Mode: GEM)
Back |
| Exit |
| Next |
|
|
|
|
|
1 2 3 4
Processing the Pro:Centric Configuration...
Downloading the maintenance files takes several minutes.
Please wait...
| 20% |
| Retrieving files from data channel 75 |
Application files | GEM app downloaded |
Maintenance files | In progress... |
– Updating Configuration File
Warning - Do not remove AC power or the signal cables during these steps
1 2 3 4
The TV will turn off in | 3 second(s). |
Installed Components | |
Pro:Centric Application | GEM application downloaded |
Maintenance Files | LY560H_Config.tlx |
Reboot |
| Turn Off |
|
|
|
15 |