Cloning Procedures (Cont.)

(Continued from previous page)

7.With the TV Manager / USB Download Menu on display, use the Up/ Down arrow keys to select Teach To TV (TLX), and then press OK.

8.In the Teach To TV (TLX) window, use the Up/Down arrow keys to select the TLX file you want to install.

Note: Filenames for TLX files that were Learned from a TV are comprised of the TV model and a five-digit number, for example, xxLY560H-UA00001.TLX.

9.If the TLX file includes an FTG Channel Map, select the desired Channel Tuning / Channel Banner Display option at the right side of the Teach to TV (TLX) window:

•Press the green button on the Installer Remote to select Logical tuning, or

•Press the yellow button on the Installer Remote to select Physical tuning.

A checkmark will appear at the left of the selected option. Logical tuning is selected by default.

Note: If a TLX file does not include an FTG Channel Map, the message, “No Channel Map in TLX file,” will be displayed at the right of the screen.

10.Press OK when you are ready to initiate the Teaching process.

Teaching status will be shown on a progress bar in a new window. Do NOT remove the USB device until Teaching is complete. When the Teaching process is complete, the TV will briefly display a “Teaching Completed” window and then exit the TV Manager / USB Download Menu.

11.Remove the USB memory device from the Target TV, and verify that the appropriate configuration is now resident on the Target TV.

Note: If the Target TV was previously in Pass-through Mode, and the TLX file used for Teaching contained an FTG Channel Map, the Target TV CPU is now in FTG Mode.

After the Teaching process is complete, the TV tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specified, the TV will tune to that channel, though, in the case of FTG Mode configuration, a channel banner will only be displayed if the Start Channel is included in the FTG Channel Map (depending on your selection in step 9, the channel banner will display either the Start Channel’s logical channel number or physical RF channel number). Otherwise, the TV will either return to the last channel tuned (TV in Pass-through Mode) or tune to the first channel in the FTG Channel Map (TV in FTG Mode). If the latter, remember that the channels in the FTG Channel Map are always arranged in logical order, regardless of your selection in step 9.

TV Manager

USB

Ez Download

Diagnostics

 

 

Logo Image Download

 

 

 

Upgrade TV Software

 

 

 

Upgrade PTC Software

 

 

 

 

Teach To TV (TLX)

 

 

 

Previous

OK

Note: TV Manager / Diagnostics

is for service use only.

Teach to TV (TLX)

xxLY560H-UA00001.TLX

Channel Tuning /

Channel Banner Display

 

Logical

 

Physical

Previous

OK

Updating TLX File... 50 %

Do not remove the USB from the port! Do not unplug! xxLY560H-UA00001.tlx

206-4258

37