IP Environment Setup (Cont.)
(Continued from previous page)
IP Configuration
a)In the Media Type field, use the Left/Right arrow keys to select IP.
Note: If the Media Type has already been set in the
Note: Setting the Media Type to “IP” automatically sets the Data Channel field to “253.” You cannot alter this setting (unless you revert Media Type to “RF”). Also, it is not possible to direct enter “253” in the Data Channel field.
b)In the Server IP and Port Number fields, either key in or use the Left/Right arrow keys to select the appropriate values for the Pro:Centric server IP address and port number. The IP address must match the IPv4 multicast address and the port number must match the port number that is set in the Pro:Centric server.
Note: If the server IP address and port number have already been set in the
Pro:Centric Application Mode Configuration
In the Mode field, use the Left/Right arrow keys to select the appropriate Pro:Centric Application Mode
Note: If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in the
3.In the Update Event field, use the Left/Right arrow keys to select On or Off, as required. Based on the Update Time settings, the Wake For Update feature wakes the TV once daily to check for, and if applicable, download updates from the Pro:Centric server. See Installer Menu item 121 UPDATE TIME HR description on page 30 for additional information on Wake For Update functionality. If you set Update Event to “On,” specify the appropriate Wake For Update time in the Update Time fields, as desired. Note that the Update time set in this menu is based on a
4.Once all fields are completed as required, either select Close and then press OK on the Installer Remote or press 
to return to the IP Environment Menu.
47 |