A-4
PREPARATION
PREPARATION
STAND INSTALLATION
(
Except for
55SL8***)
1
3
4
Carefully place the TV screen side down on a cush-
ioned surface to protect the screen from damage.
2Assemble the parts of the SSttaanndd BBooddyywith
the SSttaanndd BBaasseeof the TV.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the
back of the TV.
Stand Body
Stand Base
■
Image shown may differ from your TV
When assembling the desk type stand, check whether the
bolt is fully tightened. (If not tightened fully, the product
can tilt forward after the product installation.) If you tight-
en the bolt with excessive force, the bolt can deviate from
abrasion of the tightening part of the bolt.
BACK COVER FOR WIRE
ARRANGEMENT
■
Image shown may differ from your TV.
Install the CABLE MANAGEMENT CLIP as
shown.
1
CABLE MANAGEMENT CLIP
Connect the cables as necessary. To connect
additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
2
NOTE
!
GGDo not use the CABLE MANAGEMENT CLIP to
lift the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
After Connecting the cables as necessary,
install CABLE HOLDER as shown and bundle
the cables. To connect additional equipment,
see the EExxtteerrnnaall eeqquuiippmmeenntt SSeettuuppsection.
1
CABLEHOLDER
FOR DESK-TYPE STAND
FOR WALL MOUNT
Downloaded From TV-Manual.com Manuals