In-Call Menu

26

Rejecting an Incoming Call

You can reject an incoming call without
answering by simply pressing the [END]
key.

Muting the Microphone

You can mute the microphone during a call
by pressing the right soft key [Mute]. The
handset can be unmuted by pressing the
right soft key [Unmute]. When the handset is
muted, the caller cannot hear you, but you can
still hear the caller.

Using the Speakerphone

You can use the integrated Speakerphone
during a call by pressing the [OK] key.
The loudspeaker is automatically deactivated
when you end the call. During the call, you
can disable the Speakerphone by pressing the
[OK] key again.
n

Warning

Due to higher volume levels, don’t place the
phone near your ear while the speakerphone
is enabled.

Conference Calls

The conference service provides you with the
ability to have a simultaneous conversation
with more than one caller. The conference
call feature can be used only if your network
service provider supports this feature.
A conference call can only be set up when
you have one call active and one call on hold,
meaning both calls must have been answered.
Once a conference call is set up, calls may
be added, disconnected or separated (that
is, removed from the conference call but
still connected to you) by the person who
set up the conference call. These options
are all available from the In-Call menu. The
maximum number of callers in a conference
call is five. Once started, you are in control
of the conference call, and only you can add
calls to the conference call.