9

STAND INSTRUCTIONS
(For 50/60PK750)
ꔛ
Image shown may differ from your TV.
!
NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
1Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2Assemble the parts of the STAND BODY
with the STAND BASE of the TV.
INSTALLATION (For 50PK750)
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
When installing the wall mounting bracket, use
the PROTECTION COVER.
1Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2Remove the screws that hold the stand on.
3Detach the stand from TV.
DETACHMENT
STAND BASE
STAND BODY
M5 x 14
3Assemble the TV as shown.
4Install the 4 screws into the holes shown.
M4 x 28
50PK750 60PK750
M4 x 30
M4 x 28
PROTECTION COVER
Fix a guide to the outside.
Downloaded From TV-Manual.com Manuals