Unpacking &
Installing
By following the basic steps on these two pages you will be able to quickly check that your oven is operating correctly. Please pay particular attention to the guidance on where to install your oven. When unpacking your oven make sure you remove all accessories and packing. Check to make sure that your oven has not been damaged during delivery.
Unpack your oven and place it on a flat level surface.
GLASS TRAY
ROTATING RING
Place the oven in the level location of your choice with more than 85cm height but make sure there is at least
30cm of space on the top and 10cm at the rear for proper ventilation. The front of the oven should be at least 8cm from the edge of the surface to prevent tipping.
An exhaust outlet is located on top or side of the oven. Blocking the outlet can damage the oven.
The right side in which has exhaust outlet must be at 10 cm from wall or something to block.
THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL CATERING PURPOSES
4