20
PC Setup
-See your computer’s image on the monitor.
•Press POWER button on the PC and press ON/OFF button
on the Monitor. After this press button on the Monitor or
press POWER button on the remote control.
•Press INPUT SELECT button on the remote control to
select RGB.
•Set the resolution of PC to XGA(1024x768) or lower.
(Refer to page 21.)
On the remote control
How to connect
How to use
Make the connections shown in the illustration below.
•Set the computer video output to SXGA (1280x1024) or lower resolution. (If the video output of the
PC is not compatible with the Monitor, no picture will appear on the Monitor. See page 21.)
•As shown below, connect the videooutput of the PC to the Monitor RGB-PC
INPUT(VGA/SVGA/XGA) RGB-DTV INPUT(480p/720p/1080i).
•Connect the audio out from the PC to the Audio jacks on the Monitor. (Audio cables not included
with the Monitor)
•If available, adjust PC sound to your preference.
•To setup this monitor in your PC Windows environment, select Normal, Standard or Default moni-
tor. This monitor does not support Plug and Play function.
Y
(+) ( ) (+)( )
EXTERNAL SPEAKER(8Ω)
RL
R
AUDIO VIDEO
(MONO)
L
PP
COMPONENT(480i/480p/720p/1080i)
(DVD/DTV INPUT)
BR
RGB-DTV INPUT
RGB-PC INPUT
(VGA/SVGA/XGA)
(480p/720p/1080i)
PYP
(+)( ) (+)( )
AC INPUT
BR
EXTERNAL SPEAKER (8Ω)
RL
AV INPUT S-VIDEO
AUDIO
(MONO)
RLVIDEO
COMPONENT (480i/480p/720p/1080i)
(DVD/DTV INPUT) RGB-PC INPUT(VGA/SVGA/XGA/SXGA)
RGB-DTV INPUT(480p/720p/1080i)
AUDIO
RL
AUDIO INPUT
AV INPUT S-VIDEO
RL
AUDIO INPUT
RS-232C
RS-232C
Tips
•Avoid prolonged display of a still image, as it may cause a permanent image to remain
even after you change the image.
Monitor back panel
INPUT SELECT