TABLETOPAUDIO SYSTEM ] USER GUIDE 11

Use your player as an alarm clock

Press and hold ALARM on the player for two seconds. Press ./>
repeatedly, the display changes in the following order, AM, FM, CD, USB.
Press ALARM when the function you want to be woken by is showing.
Next, you set the time to get alarm activated. Use ./> to change the
hours and minutes and ALARMto save.
Next, the volume (VOL) setting display appears. Use ./>to change
the volume and ALARMto save. The clock icon shows that the alarm is
set. Switch the system off. When the system is turned off, you can check
the time the alarm is set for by pressing ALARM. You can also turn the
alarm on and off by pressing ALARM.
NOTES :
• If you don’t set clock, the alarm function doesn’t work.
• When any button is not pressed for longer than 5 minutes with the alarm
beeping, the alarm is automatically canceled.

SNOOZE function

This function wakes you up every 5 minutes if you do not turn off the
alarm. When alarm is on and you press CLOCKor ALARM, CD or USB is
changed into pause & mute. The tuner is on mute mode for 5 minutes and
then changed into play & mute off.
Setting the Clock
1. Turn the power on:
2. Press for at least 2 seconds:
3. Choose from either: 12HR (for an am and pm
display) or 24HR (for a 24 hour display).
4. Confirm your selection:
5. Select the hours:
6. Press:
7. Select the minutes:
8. Press:
ON PLAYER
11/]]
CLOCK
./>
CLOCK
./>
CLOCK
./>
CLOCK

Fall asleep while listening to your player

Press SLEEP on the remote control repeatedly, the display changes in the
following order, SLPOFF - LIGHT - corresponding icons. Press ./>
repeatedly on SLPOFF, the display changes in the following order,
SLP90 (dimmer ON)
→
SLP80 (dimmer ON)
→
SLP70 (dimmer ON)
→
SLP60 (dimmer ON)
→
SLP50 (dimmer ON)
→
SLP40 (dimmer ON)
→
SLP30 (dimmer ON)
→
SLP20 (dimmer ON)
→
SLP10 (dimmer ON)
→
SLPOFF (dimmer OFF).

Mood Lighting

Press SLEEP on the remote control repeatedly, the display changes in the
following order, SLPOFF - LIGHT - corresponding icons.
Press ./>repeatedly on LIGHT, the display changes in the following
order, L--1
→
L--2
→
L--3
→
L--OFF.

About MP3/WMA

MP3/WMADisc compatibility with this unit is limited as follows:
• Sampling Frequency : 8 - 48 kHz (MP3), 32 - 48 kHz (WMA)
•Bit rate : 8 - 320 kbps (MP3), 48 - 320 kbps (WMA)
• CD-R physical format should be “ISO 9660”
• If you record MP3/WMAfiles using the software which cannot create a
FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files. We recommend that you use “Easy-CD Creator”, which creates
an ISO 9660 file system.
•Do not use special letters such as “/ : * ? “ < >”etc.
•Even if the total number of files on the disc has more than 1000, it will
only show up to 999.