Data Management
If the workstation modem phone number was not pre- programmed, enter the phone number, then press Dial. If the phone number appears on the screen, simply press Dial.
Enter Phone # | ||
9236699 |
| |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
Clear | 0 | Del |
| ||
Menu | Wait | Dial |
A series of messages are displayed on the screen indicating the status of the transfer. When the transfer is complete, the bedside unit beeps and a message appears.
3Remove the bedside unit from the connection module and press Cont. to continue.
If the bedside unit is off when you remove it from the connection module, you can check to see that the transfer was successful by turning on the bedside unit. If an error occurred during transfer, the following message appears after the Status screen:
Last Data Transfer mm/dd/yy hh:mm Failed.
48
