| Lytecaster® Recessed Downlighting 1000AICM |
Page 1 of 1 | 5" Aperture Incandescent Insulated Ceiling, AirSeal® |
Complete Fixture consists of Reflector Trim &
| Reflector Trims — See Individual Reflector Trim Specification Sheets |
|
| |||||||||
|
| Open Downlight |
|
|
| Recessed |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Satin |
|
| Basic |
|
|
| Enclosed | Open | Wall |
| Reflector | Cone | Cone |
| Baffles | White | Adjustable | Eyeball | Diffusers | Wet Location | Washer | |
|
|
|
|
|
|
|
|
|
|
|
|
|
1000AICM | 1045 | 1012 | 1008 |
| 1005 | 1071 | 1027 | 1029 | 1022 | 1021 | 1084CD | 1035 |
| 1046 | 1012NM | 1008NM |
| 1005NM |
| 1027CD | 1029CD | 1022WH | 1024 | 1084WH | 1035WH |
| 1046CD | 1013 | 1010 |
| 1005BNM |
| 1027NM | 1029NM | 1023 | 1090 |
| 1085 |
|
| 1013CD | 1010NM |
| 1005WH |
| 1027CDNM | 1029CDNM | 1023WH |
|
|
|
|
| 1013BK |
|
| 1076 |
| 1027BKNM | 1029BKNM | 1082 |
|
|
|
|
| 1013WH |
|
| 1076WH |
| 1027WH | 1029GDNM |
|
|
|
|
|
| 1013NM |
|
|
|
| 1038 | 1029CLNM |
|
|
|
|
|
| 1013CDNM |
|
|
|
| 1038NM | 1029CL |
|
|
|
|
|
| 1013BKNM |
|
|
|
| 1048 | 1029GD |
|
|
|
|
|
|
|
|
|
|
| 1048NM | 1029BK |
|
|
|
|
|
|
|
|
|
|
| 1029BNM | 1029WH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
1.Housing: .026" (#20 ga.) galvanized steel. U.L. listed for direct contact with thermal insulation. AirSeal housing minimizes air leakage to less than 2 CFM at 1.57 psf, which complies with Washington State Energy Code (Section 502.4) and reduces heat loss and condensation on ceiling. Access door for inspection of junction box.
2.Mounting Frame: .036" (#20 ga.) galvanized steel. Accommodates all ceilings up to 1" thick. 3/8" deep integral lip. Four slots are positioned 90º apart to simplify alignment.
3.Junction Box: 2" x 4" x 4", .060" (#14 ga.) galvanized steel. U.L. listed for, maximum of 6 No. 12 ga., 90º C through branch circuit conductors. Quick release “L” shaped cover for outside access to wiring. Access door inside of housing allows easy inspection of wiring without removal of housing. Integral cable clamps permit attachment of nonmetallic Romex® or armored cable without the need for additional connectors.
4.Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to 27", rotatable and lockable, with integral
5.Socket Housing: Impact extruded aluminum or galvanized steel.
6.Socket: Porcelain medium base; nickel plated screw shell.
7.Thermal Protector: Meets NEC and U.L. requirements. Located inside housing
Options & Accessories
Mounting Bars: | 1964 | - 20" set of (2) |
1956 | - set of (4) |
Options & Accessories (continued)
| |
Mounting Ring: | 1967B - 1 1/4” to 2" thick ceilings. |
277V Remote |
|
Transformer: | 7997 - 277V down to 120V |
| 300W max. load. |
Labels
UL (Suitable for Damp Locations), I.B.E.W.
Romex® is a registered Trademark of General Cable Industries Inc.
Job Information | Type: |
|
|
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508)
© 2006 Genlyte Group LLC • F0806