Lightwave Communications USB-Wizard manual Introduction, Materials

INTRODUCTION

The Lightwave Communication USB-Wizard USB KVM switch allows access to any Windows, MAC, or

SUN USB CPUs from one monitor, USB keyboard and USB mouse (up to 8 CPUs as a single switch or 64 CPUs when cascaded). Internal microprocessor circuitry allows all USB CPUs to be booted simultaneously without keyboard error. Port selection is accomplished by front panel push buttons or commands typed on the keyboard. Port lights & status LEDs continuously update on the front panel.

Available Options

Switch models are available in 60 or 50 Hz, and 110 or 220V.

On Screen Display (OSD) Control feature will superimpose operating menus directly onto the monitor for security administration and control.

Types of User Input Devices Supported:

USB keyboard with Windows layout

USB keyboard with SUN layout

USB keyboard with MAC layout

USB Mouse - (up to 3 buttons)

USB IntelliMouse (scrollwheel)

USB Hub

Mouse-trak trackball

Logitech Cordless Elite Duo keyboard and mouse

Crystal Vision keyboard with touchpad

Gyration keyboard/mouse

Lightwave Communications USB-PS/2 Adapter

Lightwave Communications USB-SUN Adapter

Types of CPUs Supported:

Any USB CPU supporting USB version 1.0 or above including:

USB WINxx

USB MAC

USB SUN

MATERIALS

Materials supplied with this kit:

USB Wizard (8 ports) USB KVM Switch 120VAC/5VDC AC Adapter

Materials Not supplied but REQUIRED:

A USBVEXT-xx-MM cable for each USB CPU being connected to the switch must be used for monitor, keyboard and mouse interface.

where:

xxis the length of the cable in feet MM indicates male-to-male connector

Cables can be purchased from Lightwave Communicatins by calling +49 (0)89 306381-0

1