INSTALLATION
Return to Section TOC
DIP SWITCH SETTINGS AND LOCATIONS
DIP switches on the PC boards allow for custom con- figuration of the Power Wave. Access the DIP switch- es as follows:
WARNING
ELECTRIC SHOCK CAN KILL.
•Do not touch electrically live parts or electrodes with your skin or wet cloth- ing.
CONTROL BOARD DIP SWITCH:
switch 1 = reserved for future use switch 2 = reserved for future use switch 3 = reserved for future use switch 4 = reserved for future use switch 5 = reserved for future use switch 6 = reserved for future use switch 7 = reserved for future use switch 8 = work sense lead
Return to Section TOC
•Insulate yourself from the work and ground.
•Always wear dry insulating gloves.
•Turn off power at the disconnect switch.
•Remove the top four screws securing the front access panel.
•Loosen, but do not completely remove, the bottom two screws holding the access panel.
•Open the access panel, allowing the weight of the panel to be carried by the bottom two screws. Make sure to prevent the weight of the access panel from hanging on the harness.
switch 8 | work sense lead |
off | work sense lead not connected |
on | work sense lead connected |
FEED HEAD BOARD DIP SWITCH:
switch 1 = reserved for future use switch 2 = reserved for future use switch 3 = reserved for future use switch 4 = reserved for future use switch 5 = reserved for future use switch 6 = reserved for future use switch 7 = negative polarity switch switch 8 = high speed gear
Section TOC
Return to Master TOC
Return to Master TOC
Master TOC
•Adjust the DIP switches as necessary. Using a pen- cil or other small object, slide the switch left for the ON position or to the right for the OFF position, as appropriate.
•Replace the panel and screws and restore power.
switch 7 | electrode polarity |
off | positive |
on | negative |
switch 8 | wire drive gear |
CONTROL BOARD (LOCATED IN CONTROL BOX BEHIND CASE FRONT)
FEED HEAD BOARD (LOCATED IN CONTROL BOX BEHIND CASE FRONT)
off | low speed gear |
on | high speed gear |
DEVICENET/ GATEWAY BOARD (LOCATED BEHIND FRONT COVER)
FRONT
COVER
BANK S1 |
BANK S2 |
CASE FRONT
OPENING IN
CASE FRONT
TO ACCESS
CONTROL
BOX
Return to Section TOC
Return to Master TOC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RIGHT | |
LEFT |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER WAVE 455/R