NOTE:
With Simulate Position checked, the simulator will also automatically run the GPS simulator (if GPS data was recorded with the sonar log).
2.To use the default sonar chart log stored in the unit, press ENTEXIT. The recorded chart begins scrolling across the screen, just as if you were on the water.
3.Turn off Sonar Simulator by pressing MENUMENU↓ to SONAR
SETUPENT↓ to SONAR SIMULATORENTENTEXIT.
Title bar with chart file name 
"Play" symbol flashing
Sonar Page, playing a recorded sonar chart in Sonar Simulator mode.
Tip:
The Sonar Simulator can use sonar charts that you or a friend have recorded (logged) on an MMC card. (To see how, read the entry in this section on Log Sonar Chart Data.) To play back your own sonar chart, make sure the MMC containing the chart is installed, then:
1.Press MENUMENU↓ to SONAR SETUPENT↓ to SONAR SIMULATORENT.
2.Press ↓ to CHART USEDENT.
3.Press ↓ or ↑ to select chart nameENT↑ to SONAR SIMULATOR
ONENTEXIT.
While you're in the Sonar Simulator menu, don't forget to check Simulate Position if you want to run the sonar and GPS simulators simultaneously. As you review sonar logs, you can create waypoints to mark sites you want to return to.
While the simulator is running, you can switch from one chart log to another by opening the Sonar Simulator menu and using the in- structions in step 2 to select a different chart.
89
