To turn
this feature on, simply
press
the 2nd key, then press the
"4" key. The paper speed will im-
mediately slow
down, signifying
that the function is enabled.
To turn the Alternate Transmit
and Print
feature off, simply press
the 2nd key and then press the
"7" key. The paper speed will im-
mediately speed up, signifying that
the function has been turned oft.
When entering any number or
combination of keys on the key-
board and you make
a mistake,
press
the 2nd KEY then 0. This
will clear the keyboard. For exam-
ple, if you wanted to set a Lower
Limit
of 50 feet and pressed 40
feet instead, before
pressing the
Lower
Limit Key press 2nd - 0
and the keyboard will be cleared.
You could then press 5 - 0 - Lower
Limit for the desired range.
To cause the X-15A to reprint
the level of Disbrimination, SCC,
or Pulse Width at the bottom of
the
page, simply press
2nd and
then the corresponding key (DISC,
5CC/MARK,
or PULSE) and it will
be reprinted immediately.
Paper Saving Feature
APPROXIMATE PAPER SPEED
Without Alternate Transmit and Print
Minimum I Maximum
LOWER
LIMIT Paper Speed Paper Speed
Inches Hours Inches Hours
RANGE (feet)
10-120
Per Mm Per Roll Per Mm Per Roll
1.0 10 2.35 4.25
130-510 0.5 20 1.4 7.14
520-830 0.15 66 0.75 13.3
Below 840 0.15 66 0.75 13.3
—
APPROXIMATE PAPER SPEED
With Alternate Transmit and Print
Minimum Maximum
LOWER
LIMIT Paper
Speed Paper Speed
Inches Hours
Inches Hours
RANGE (feet)
10-120
Per Mm Per Roll Per Mm Per Roll
0.5 20 1.4 7.14
130-510 0.20 50 0.8 12.5
520-830 0.15 66 0.75 13.3
Below 840 0.15 66 0.75 13.3
LITHO USA 988-0096-01
INSTALLATION AND OPERATION MANUAL
X-15A

COMPUTER SONAR

•LOWRANCE ELECTRONICS, INC.
12000 F, SKELLY DR, TULSA, OK 74128
PDF compression, OCR, web-optimization with CVISION's PdfCompressor