MDV455_17x 11/11/03 4:34 PM Page 11
Hookups (cont’d) 11
Connecting to a TV Only
TV has a yellow Video In jack
Back of TV
(example only)
2
LEFT AUDIO IN
RIGHT AUDIO IN
VIDEO IN
1
3
Connect the yellow VIDEO jack of the DVD Player to the
1 corresponding VIDEO IN jack on your TV. Use the supplied video cable, which has yellow markings.
Connect the supplied audio cable to the white and red Audio L/R
2 (left and right) jacks on the DVD Player and to the left/right AUDIO
IN jacks on the TV. Match the cable colors to the jack colors.
Plug the power cords of the DVD Player and the TV into an active
3 power outlet. Press
Turn on the TV. Set it to the correct Video In channel. See your TV
4 owner’s manual for details. Or, go to your lowest TV channel (01 or
02)and change channels downward until you see the DVD screen saver on the TV.
Helpful Hints
• On the TV, the Video In jack is usually yellow and might be labeled video, CVBS, composite, or baseband.
• If your TV has a single Audio In jack instead of separate left/right Audio In jacks, you will need a different audio cable. You need a “splitter” audio cable to go from the Audio L/R (left/right) jacks of the DVD Player to the single Audio In jack on your TV. See your electronics retailer for details.
