Makita 3708FC ASSEMBLY

CAUTION:

•Before plugging in the tool, always be sure that the tool

is switched off.

To start the tool, move the switch lever to the I (ON) position.

To stop the tool, move the switch lever to the O (OFF) posi-

tion.

The tool equipped with electronic function is easy to operate

because of the following features.

Electronic speed control for obtaining constant speed. Possi-

ble to get fine finish, because the rotating speed is kept con-

stant even under load condition.

Soft-start feature minimizes start-up shock, and makes the

tool start smoothly.

CAUTION:

•Do not look in the light or see the source of light directly.

To turn on the lamp, start the tool. Then, the lamp lights up

the top of the bit. To turn it off, stop the tool.

NOTE:

•Use a dry cloth to wipe the dirt off the lens of lamp. Be

careful not to scratch the lens of lamp, or it may lower the

illumination.

ASSEMBLY CAUTION:

•Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

1. Switch lever

001982