2
SPECIFICATIONS
Model 4014N 4014NV
Capacities
Air pressure (water column)..................... ................................. 560 mm 0 – 560 mm
Air volume .......................................... ...................................... 2.8 m3/min. 0 – 2.8 m3/min.
No load speed (min–1) .......... ...................................................... 16,000 0 – 16,000
Overall length .................................................. ............................ 430 mm 430 mm
Net weight ........................................ ........................................... 1.75 kg 1.75 kg
• Due to our continuing program me of research and development, the specifications herein are subject to change with-
out notice.
• Note: Specifications m ay differ from country to country.
Power su pply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated in accordance w ith European Standard and can,
therefore, also be used from sockets without earth wire.
For European countries only
Noise and Vibration of Model 4014N
ENG005-2-V3
The typical A-weighted noise levels are
sound pressure level: 87 dB (A)
sound power level: 98d B (A)
Uncertainty is 3 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s2.
These values have been obtained according to
EN60745.
For European countries only
Noise and Vibration of Model 4014NV
ENG005-2-V3
The typical A-weighted noise levels are
sound pressure level: 86 dB (A)
sound power level: 97d B (A)
Uncertainty is 3 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s2.
These values have been obtained according to
EN60745.
EC-DECLARATION OF CONFORMITY
ENH101-4
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN60745, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Yasuhiko Kanzaki
CE 2005
Director
MAKITA INTERNATIONAL EUROPE LTD.Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Symbols
The followings show the symbols used for the tool. Be sure that you understand thei r meaning before use.
❏Read instruction manual.
❏DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment together with household waste material!
In observance of European Directive 2002/96/EC on waste elec trical and electronic equipment and
its implementation in accordance with national law, electric equipment that have reached the end of
their life must be collected separately and returned to an environmentally compatible recycling facil-
ity.