Makita 4190D ASSEMBLY

Loosen the bolt (A) on the depth guide and the bolt (B) on

the bevel scale plate with the hex wrench. Set for the desired

angle (0° - 45° ) by tilting accordingly, then tighten the bolts

(A) and (B) securely.

CAUTION:

•After adjusting depth of cut and bevel cutting angle, be

sure to tighten the bolts (A) and (B) securely.

For straight cuts, align the A position on the front of the base

with your cutting line. For 45° bevel cuts, align the B position

with it.

NOTE:

•When making bevel cuts, view the cutting line on the

workpiece through the window in the blade case in order

to cut more accurately. If you have difficulty seeing it

because of the water tank, adjust the position of the tank

by tilting it backward slightly.

CAUTION:

•Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the “OFF” position when

released.

To prevent the switch trigger from being accidentally pulled, a

lock-off lever is provided.

To start the tool, slide the lock-off lever in the direction of the

arrow and pull the switch trigger. Release the switch trigger

to stop.

ASSEMBLY CAUTION:

•Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out any

work on the tool.

1. Bevel scale plate

2. Bolt (B)

3. Bolt (A)

003514

1. Blade case

2. Base

003519

1. Lock-off lever

2. Switch trigger

003522