Brush Maintenance Essentials (Disassembly and Assembly)
ENGLISH
Disassembly
1.Remove the two flange bolts (M5 x 20), then remove the bracket cover.
2.Remove the two flange bolts (M5 x 16), then remove the brush.
Assembly
1.While pressing the brush against the slip ring, secure it (1.5~2N・m) by tightening it with the two flange bolts (M5 x 16).
When doing so, confirm that the brush is in the proper position relative to the slip ring.
2.Secure the bracket cover (3~4N・m) by tightening it with the two flange bolts (M5 x 20).
Brush
Slip ring
Brush holder |
Flange bolts |
Bracket cover |
Flange bolts |
