Makita GA7001L OPERA TION

(optional accessory)

WARNING:

•Always use supplied guard when flex wheel is on tool.

Wheel can shatter during use and guard helps to reduce

chances of personal injury.

Follow instructions for depressed center grinding wheel/

Multi-disc but also use plastic pad over wheel. See order of

assembly on accessories page in this manual.

(optional accessory)

NOTE:

•Use sander accessories specified in this manual. These

must be purchased separately.

Mount the rubber pad onto the spindle. Fit the disc on the

rubber pad and screw the lock nut onto the spindle. To

tighten the lock nut, press the shaft lock firmly so that the

spindle cannot revolve, then use the lock nut wrench and

securely tighten clockwise.

To remove the disc, follow the installation procedure in

reverse.

OPERATION WARNING:

•It should never be necessary to force the tool. The

weight of the tool applies adequate pressure. Forcing

and excessive pressure could cause dangerous wheel

breakage.

•ALWAYS replace wheel if tool is dropped while grinding.

•NEVER bang or hit grinding disc or wheel onto work.

•Avoid bouncing and snagging the wheel, especially

when working corners, sharp edges etc. This can cause

loss of control and kickback.

•NEVER use tool with wood cutting blades and other

sawblades. Such blades when used on a grinder

frequently kick and cause loss of control leading to

personal injury.

1. Lock nut

2. Flex wheel

3. Plastic pad

4. Inner flange

001103

1. Lock nut

2. Abrasive disc

3. Rubber pad

001114