Makita LS1040 ASSEMBLY

WARNING:

•NEVER use tool without a fully operative switch trigger.

Any tool with an inoperative switch is HIGHLY

DANGEROUS and must be repaired before further

usage.

•For your safety, this tool is equipped with a lock-off

button which prevents the tool from unintended starting.

NEVER use the tool if it runs when you simply pull the

switch trigger without pressing the lock-off button.

Return tool to a Makita service center for proper repairs

BEFORE further usage.

•NEVER tape down or defeat purpose and function of

lock-off button.

This tool is equipped with an electric blade brake. If the tool

consistently fails to quickly stop blade after switch trigger

release, have tool serviced at a Makita service center.

The blade brake system is not a substitute for blade guard.

NEVER USE TOOL WITHOUT A FUNCTIONING BLADE

GUARD. SERIOUS PERSONAL INJURY CAN RESULT.

ASSEMBLY CAUTION:

•Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

CAUTION:

•Always be sure that the tool is switched off and

unplugged before installing or removing the blade.

•Use only the Makita socket wrench provided to install or

remove the blade. Failure to do so may result in

overtightening or insufficient tightening of the hex bolt.

This could cause an injury.

1. Stopper pin

001792