Marantz NR1602 Network Setup , Language Select , Speaker Calibration, Source Setup , Speaker Connection

4

ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA РУССКИЙ POLSKI TÜRKÇE

When preparations are complete, start the Setup Wizard.

Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the

instructions on the screen. You can skip or cancel at each section if necessary.

Setup Wizard

This completes the Setup Wizard.

Network Setup Please connect LAN cable to ETHERNET port on

rear panel of receiver, and other side of

cable to network router.

When connection is complete, press [ENTER]

to continue.

Network Setup

Conﬁgure to playback audio ﬁles saved

onto a computer or Internet radio.

These settings can be changed in the following menu even after setting the Setup Wizard

(vmpage 92 “Network Setup”).

Source Setup BD

DVD

SAT

GAME

Please select device.

Source Setup

Set the connecting terminals for each

device to be set, and connect to the

terminals.

These settings can be changed in the following menu even after setting the Setup Wizard

(vm page 101 “Input Assign”).

Speaker Calibration

Detect & Measure (Main)

Please connect

microphone.

Measure

Speaker Calibration MultEQ

Conﬁgure the settings for your speakers,

and for the optimum surround sound for

your room.

These settings can be changed in the following menu even after setting the Setup Wizard

(vm page 15 “Set up speakers (Audyssey® Auto Setup)”).

Speaker Connection

Please select the

speaker configuration

to be used.

5.1ch

7.1ch

Others

7.1ch adds 2 more

speakers to 5.1ch, for

enhanced surround.

Speaker Connection

Connect the speakers for surround sound.

NOTE

Connections for speakers other than 7.1 channel or 5.1

channel speakers cannot be set using the Setup Wizard.

Select “Others”, and then select “Skip” in “2. Speaker Connection” to proceed to “3. Speaker

Calibration”. (For details on the setting method, see m page 51 “Speaker installation/connection

(Advanced connection)”.)

Language Select English

Deutsch

Français

Please select the

language for the on

screen menu.

Language Select

Marantz NR1602 Network Setup , Language Select , Speaker Calibration, Source Setup , Speaker Connection

4

When preparations are complete, start the Setup Wizard.

Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the

instructions on the screen. You can skip or cancel at each section if necessary.

Setup Wizard

This completes the Setup Wizard.

Conﬁgure to playback audio ﬁles saved

onto a computer or Internet radio.

These settings can be changed in the following menu even after setting the Setup Wizard

(vmpage 92 “Network Setup”).

Set the connecting terminals for each

device to be set, and connect to the

terminals.

These settings can be changed in the following menu even after setting the Setup Wizard

(vm page 101 “Input Assign”).

Speaker Calibration

Conﬁgure the settings for your speakers,

and for the optimum surround sound for

your room.

These settings can be changed in the following menu even after setting the Setup Wizard

(vm page 15 “Set up speakers (Audyssey® Auto Setup)”).

Speaker Connection

Connect the speakers for surround sound.

Connections for speakers other than 7.1 channel or 5.1

channel speakers cannot be set using the Setup Wizard.

Select “Others”, and then select “Skip” in “2. Speaker Connection” to proceed to “3. Speaker

Calibration”. (For details on the setting method, see m page 51 “Speaker installation/connection

(Advanced connection)”.)

Set the language for the instructions on

the television screen.

These settings can be changed in the following menu even after setting the Setup Wizard

(vm page 98 “Language”).