ENGLISH
5
Names of parts and their functions
Please read the following instructions referring to the illustration
on page 56.
■FRONT PANEL
z
POWER
switch
STANDBY indicator
Press this switch to turn ON the unit, press it again to turn into
STAND-BY and stand-by indicator will light.
xDISC TRAY
cREMOTE SENSOR
This window is to receive signals from the remote control unit.
vDISPLAY WINDOW
This window shows status of the unit.
b
SOUND MODE
button
This button is to select sound mode on a Super Audio CD.
Select from Multi-Channel, Stereo and CD (if available). ( See
page 11)
n
TIME
button
This button is to change information displayed from text
information to time information when playing a disc with text.
Also this button can change time information displayed. Each
time it is pressed, the display changes in the following order.
“track elapsed time” → ”track remaining time” → ”total
remaining time” → “track elapsed time” ( See page 11)
m
TEXT
button
When a disc with text is being played, this button changes
information displayed from time information to text information.
( See page 15)
When a disc without text information is being played, “No
Text” will be displayed.
,
DISPLAY
button
This button can turn on and turn off the display window.
.PHONES jack
This jack is to connect the headphones.
⁄0 LEVEL
This is to adjust the headphone volume.
*In SACD multi-channel play, front L/R channels will be output.
⁄1 , (Track Skip/Search
buttons)
These buttons can be used as both track skip and track search
buttons. (The buttons on the main unit only.)
: Each time this button is pressed, the track being
played is skipped forward. When this button is
held down, tracks are searched forward (Fast
Forward).
: When this button is pressed, the unit goes back
to the beginning of the current track. If the button
is pressed more times, the track being played is
skipped back. When this button is held down,
tracks are searched backward (Fast Rewind).
In program play, Fast Forward and Fast Rewind can be done
in the playing track only.
⁄2
PAUSE
button
Press this button to pause playback. If pressed again, the
unit returns to playback.
⁄3
STOP
button
Press this button to stop playback. Also this button is used to
clear all programs.
⁄4
PLAY
button
Press this button to start playback.
⁄5
OPEN/CLOSE
button
Press this button to open the tray. Put on a disk label side up.
Press the button again to close the tray.
⁄6 DISPLAY OFF
Press this button to turn on and off the information display
window.
⁄7 CD
This indicator lights when an audio CD disc is lorded, or a
hybrid SACD disc is loaded and the sound mode is in CD.
⁄8 SACD STEREO, SACD MULTI
It indicates the sound mode when a Super Audio CD is loaded.
★In this instruction manual, some operations can only be performed with the remote control. For operations that can be
performed with buttons both on the main unit and on the remote control, the button names are shown in the mark.
And for operations that can only be performed with buttons on the remote control, the button names are shown in the
mark.