H & V KEYSTONE

1 Project the image and adjust the focus, image size, and projection angle.

2 Press cKEYSTONE on the remote control repeatedly until “H & V KEYSTONE” is displayed.

•When the “GEOMETRIC ADJUSTMENT” mode has been used to adjust the im- age, a confirmation screen displays be- fore the “H & V KEYSTONE” screen, ask- ing if you want to reset the adjustments or not. Then select RESET.

ROn-screen display

H&V KEYSTONE

ENDADJUST

ENTERRESET

3 Press P or R on the remote control to align the left and right sides of the projected image.

4 Press O or Q on the remote control to align the upper and lower sides of the projected image.

5 PresscKEYSTONEoriENTERon the remote control and the “H&V KEYSTONE” mode ends.

Note

•If adjustments are made using both “H KEY- STONE” and “V KEYSTONE” at the same time, the image aspect ratio may become slightly distorted.

•When adjusting “H KEYSTONE” and “V KEY- STONE” at the same time, the values of adjust- able angles for each setting become smaller.

•The adjustable value of the “V KEYSTONE” becomes extremely small when “H KEY- STONE” is made to be the maximum value.

Vertical Keystone Correction (Adjustment with P/ R)

Horizontal Keystone Correction

(Adjustment with O/ Q)

BasicOperation

35