Marantz VP4001 4Setting On-screenDisplay, 5Setting the Video, System, 6SignalType Setting, 7Selecting the HDMI Setting, 8Selecting the Background Image

Using the “Options” Menu (Continued)

4Setting On-screen Display

Selectable	Description
items
On	All On-screen Displays are displayed.
Off	INPUT/FREEZE/AUTO SYNC/ASPECT/
	PICTURE MODE/IRIS are not
	displayed.

5Setting the Video

System

This function can only be set in S-Video or Video.

The video input system mode is factory preset to “Auto”;however, a clear picture from the connected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal.

Selectable items	Description
PAL	When connected to PAL video
	equipment.
SECAM	When connected to SECAM
	video equipment.
NTSC4.43	When reproducing NTSC
	signals in PAL video equipment.
NTSC3.58	When connected to NTSC video
	equipment.

Menu operation = Page 41

6SignalType Setting

This function allows you to select the input signal type (RGB or Component) for RGB or HDMI.

Selectable items	Description
Auto	Automatically selects the
	appropriate input signal
	between RGB and Component.
RGB	Set when RGB signals are
	received.
Component	Set when component signals
	are received.

Note

•You can also select “Signal Type” using R/C RGB/COMP. on the remote control (RGB or HDMI).

7Selecting the HDMI Setting

When there is an HDMI-capable device connected to HDMI, an optimum picture may not be displayed if the device’s output signal type and the projector’s input signal type do not match. If this should occur, switch the HDMI Setting.

Selectable items	Description
Normal	When the black levels of the
	image show banding or appear
	faded, select the option that
	results in the best picture
Expand	quality. (In most circumstances,
	“Normal” should be selected.)

Note

•The HDMI Setting can be selected only when HDMI is selected.

8Selecting the Background Image

Selectable items	Description
Blue	Blue screen
None	— (Black screen)

48