Manuals / Brands / Computer Equipment / Projector / Marantz / Computer Equipment / Projector

Marantz VP4001 Warning, Removing and Installing the Lamp Unit

1 66

Download 66 pages, 5.25 Mb

Removing and Installing the Lamp Unit

Warning!

•The lamp unit becomes very hot while the pro- jector is operating. Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury.

Optional	Lamp unit
accessory	LU4001VP

Info

•Make sure that you remove the lamp unit by the handle. Do not touch the glass surface of the lamp unit or the inside of the projector.

•To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.

•Do not loosen other screws except for the lamp unit cover and lamp unit.

1Press / I STANDBY/ON on the projector or aSTANDBY on the re- mote control to put the projector into standby mode.

•Wait until the cooling fan stops.

2Disconnect the power cord.

•Unplug the power cord from the AC socket.

•Leave the lamp until it has fully cooled down (about 1 hour).

3Remove the lamp unit cover.

•Turn the projector over. Loosen the user service screw (q) that secures the lamp

unit cover. Remove the lamp unit cover (w).

/ I STANDBY/ON button

AC socket

1

2

User service screw (for lamp unit cover)

Appendix

55

Contents

Model VP4001 User Guide DLP® Projector ENGLISH FRANÇAIS ESPAÑOL Model No.: VP4001 Serial No.: INFORMATION Declaration of conformity Caution Concerning Lamp Replacement A NOTE ABOUT RECYCLING How to Read this User Guide For Future Reference PP. 60 and Contents Preparing Using Reference CAUTION: Page Observe the following safeguards when setting up your projector Page Accessories Part Names and Functions Part Names and Functions (Continued) Rear View Page Caution Usable Range Quick Start Video Setting up the Projector Installation Setup Indication of the Projection Image Size and Projection Distance Setting up the Projector (Continued) Picture (Screen) Size and Projection Distance Page Samples of Cables for Connection Connecting to Video Equipment Connecting to Video Equipment (Continued) Page Connecting to a Computer Controlling the Projector by a Computer Turning the Projector On/Off Image Projection Image Projection (Continued) Adjusting the Projected Image 1 Adjusting the Focus 2 Adjusting the Screen Size 3 Adjusting the Height Page Correcting Trapezoidal Distortion Selecting the Type of Correction GEOMETRIC ADJUSTMENT H & V KEYSTONE Aspect Mode Page Operating with the Remote Control Menu Items Menu Items (Continued) Using the Menu Screen Using the Menu Screen (Continued) To adjust the projected image while watching it Picture Adjustment (“Picture” menu) 1Selecting the Picture Mode 2Adjusting the Image 3Adjusting the Color Temperature 4Adjusting the Colors 5Progressive 6Reducing Image Noise 7Switching the Iris (DNR) Setting 8LampSetting Computer Image Adjustment (“Fine Sync” menu) 1Adjusting the Computer Image 2Special Modes Setting 3Auto Sync (Auto Sync Adjustment) Using the “Options” Menu 1Adjusting the Image Position 2Adjusting the Overscan 4Setting On-screenDisplay 5Setting the Video System 6SignalType Setting 7Selecting the HDMI Setting 9Auto Power Off Function 0Checking the Lamp Life Status 1Reversing/Inverting Projected Images 4Fan Mode Setting 3Reducing the Power Consumption When the Power Is in Standby Mode 5Returning to the Default Settings Maintenance Maintenance Indicators Page Regarding the Lamp Warning Regarding the Lamp (Continued) Resetting the Lamp Timer Connecting Pin Assignments RS-232CSpecifications and Command Settings Computer Compatibility Chart Troubleshooting Page Specifications Dimensions Index www.marantz.com