MartinLogan PASSAGE TM I

To achieve maximum performance, it is recommended that

the Passage not be installed near a room corner or directly

behind furniture. When used as a front left/right channel, it

is recommended that the listening position be no closer to

the wall then the distance between the speakers.

Although most users will mount the Passage in a vertical

orientation, it can also be mounted in a horizontal ori-

entation (for use as a center channel). If you plan to use

the Passage in a horizontal orientation, it will cross drywall

studs and the wall will require modification. A bonded

contractor should be contacted to mount the Passage in a

horizontal orientation.

NOTE: These instructions must be carefully followed to

assure that your Passage is safely installed. Study them

thoroughly before installing your Passage's.

NOTE: The following instructions assume the mounting

surface is of standard wood frame and standard sheet rock

construction. If you wish to mount the Passage to another

type of material, you should consult a bonded contractor.

Warning! Before installing check

for obstructions behind the drywall

(electrical, plumbing and other

fixtures). To do this make a small

hole, cutting at a 45° angle (this

will make the hole easier to patch

if obstructions are found). Only

cut the mounting hole after

you have verified there are no

obstructions behind the wall.

Installation 3

INSTALLATION

Figure 1. The Passage is designed for both vertical and horizontal installation.