Matsushita LSM40-2 manual

LENNOX HEARTH PRODUCTS

KITS AND ACCESSORIES

750,184M REV. B	H5051	DASK-LSM40-2 Dual Arch Screen Kit, LSM40-2
05/2006	H5052	SK-LSM40-2	Classic Screen Kit, LSM40-2
	H5053	ASK-LSM40-2	Arch Screen Kit, LSM40-2
	H5054	DASK-LSM45-2 Dual Arch Screen Kit, LSM45-2
	H5055	SK-LSM45-2	Classic Screen Kit, LSM45-2
	H5056	ASK-LSM45-2	Arch Screen Kit, LSM45-2

LENNOX HEARTH PRODUCTS

INSTALLATION INSTRUCTIONS FOR DECORATIVE SCREEN KITS FOR USE WITH MONTEBELLO®

DAVE LENNOX SIGNATURE COLLECTION MODELS LSM40-2 & LSM45-2 DIRECT VENT GAS FIREPLACES

	Kit Contents:			Tools Required:
1	Ea. Screen Assembly	2	Ea. Short Spacers	7/32” Allen Wrench
2	Ea. Bottom Legs	4	Ea. Nuts	7/16” Nut Driver
2	Ea. Long Screws	2	Ea. L- Brackets
2	Ea. Short Screws	1	Ea. Instruction Sheet
2	Ea. Long Spacers
	Kit Contents			Chain
	(dual arch screen shown)
	Instruction Sheet
				Screen
				Assembly
	WARNINGS
		Short
		Spacers

Short ScrewsNutsContoured LegsLong Screws L- BracketsLong Spacers

Dual Arch Screen Screen Arch Screen

Figure 1

GENERAL INFORMATION

These optional decorative freestanding firescreen panels are designed to enhance the beauty of the fireplace and helps prevent direct human contact with the hot glass surface.

A chain is also provided for additional safety. When attached to the fireplace, it helps prevent the screen from tipping.

WARNINGS

Hot! Do not touch! These decorative screen panelsareNOTheatguards.The glassbehindthe screenswillbehotduringoperationandwillretain heat for a while after shutting off the appliance. Severe burns may result. Carefully supervise children in the same room as appliance.

•As with any similar heating appliance, surfaces of the frame, the door and appliance can become very hot.

INSTALLATION INSTRUCTIONS

Step 1 Using a 7/32” allen wrench and 7/16” nut driver, loosely assemble the parts as shown in Figure 1 and Figure 2 (do not tighten yet).

Step 2 Adjust the L-bracket to the height needed for this installation (slot allows up to 1 inch vertical adjustment). When you are satisfied that the screen will stand stable in front of the fireplace, then tighten the nuts on both sides.

Chain AssemblyCompleted

Screen

Assembly

Front Side Fireplace Side

Long SpacerShort Spacer Nut

Contoured Leg	L- Bracket
	Side View

Figure 2 - Assemble Legs & L-Brackets to Screen

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. 1