DELAYED START (1-24 HOURS)
If Delayed start is set to 5 hours, for example, this means that the machine will start the pro-
gramme 5 hours after you press the 
but- ton.
If you wish to delay the start of any pro- gramme temporarily, you should proceed as
follows before pressing the 
button:
1.Select the programme, but do not press the 
button.
2.Index forward with the Menu button until Delayed start appears in the display.
3.Index forward to the desired number of hours
with 
.
4.Press the Enter button once. The selected programme appears in the display.
5.Close the door and press 
to start the programme.
Delayed start is disconnected automatically at the end of the programme.
TEMPORARY SPINNING OR RINSING
If you wish to run a temporary spin or rinse pro- gramme without altering P1 - P4 , you can do the following:
1.Put in the washing and close the door.
2.Press the P1 button once.
3.Press the Menu button once.
4.Index forward with 
until Spin or Rin- se appears in the display.
5.Press the Enter button once. The selected pro- gramme appears in the display.
6.Adjust the spin speed by indexing forward with 
if required.
7.Press 
to start the programme.
If you wish to have Spin or Rinse as one of the four
IMPORTANT
If you store a programme by mistake, you can reset it to its settings at the time of delivery; see Reset programme in Chapter 11, Making your own washing programmes.
17
