A variation on the popular MILO™ high-
power curvilinear loudspeaker, the MILO 60
high-power narrow coverage curvilinear
array loudspeaker excels where controlled
horizontal coverage is needed. The self-
powered MILO 60 is a compact, lightweight
four-way system that provides 60 degrees
of horizontal coverage, and vertical cover-
age matching the original MILO. The cover-
age pattern is optimized for applications
as at the top in mixed arrays with standard
MILO or M3D line array loudspeaker sys-
tems, or for side fill hangs where keeping
sound off of side walls is important.
The MILO 60 shares the same dimensions
and rig ging components as the MILO and
MILO 120 expanded coverage high-power
curvilinear array loudspeakers to facilitate
seamless integration. The flexibility of the
MILO 60 allows it to be configured with
other Meyer Sound loud speakers in com-
plex systems. MILO 60 arrays and combined
MILO 60 :
High-Power Narrow Coverage
Curvilinear Array Loudspeaker

DATASHEET

arrays with other M Series models are easy
to deploy using the MILO QuickFly
®
rigging
accessories, such as the MG-3D/M multi-
purpose grid and MCF-MILO cast er frame.
Because rigging connections are rigid, the
array tilt is easy to adjust, often elimi nating
the need for a pullback strap in flown con-
figurations.
MILO 60 produces a peak output of 140 dB
SPL with exceptionally flat phase and fre-
quency response. Its wide operating fre-
quency range (60 Hz to 18 kHz) is comple-
mented by extended high-frequency head-
room and a dedicated very-high-frequen-
cy section (4.2 kHz to 18 kHz) that renders
delicate transient information with detailed
resolution through its coverage pattern. Its
acoustical charac teristics are designed to
facilitate seamless integration when used
with other MILO cur vilinear array elements.
A combined MILO 60/MILO/MILO 120 array
with M3D-Subs affords the precise low-

M SERIES

frequency directional control that has won
widespread acclaim for M3D systems. The
M3D-Sub provides a well-controlled cov-
erage pattern to 30 Hz, assuring that very
low-frequency energy does not spill onto
the stage or cause excessive reverberation.
In applications where directional low-fre-
quency control is not a primary consider-
ation, a MILO array can be flown adjacent to
or ground stacked with 700-HP subwoofers.
The 700-HP's power and bandwidth handle
high continuous oper ating levels and ex-
treme transient informa tion with minimal
distortion in its operating frequency range.
Meyer Sound’s RMS™ remote monitoring
system is fitted as standard, providing com-
prehensive monitoring of system perfor-
mance parameters over a Windows-based
network.
A weather-protected version with a folding
rain hood that safeguards the electronics is
optionally available.

applications

Stadiums, arenas, concert halls and
theatres
Touring sound reinforcement
Large-scale events

features & benefits

Controlled horizontal coverage angle of 60
degrees
Patented REM™ ribbon emulation manifolds
dramatically minimize distortion
Exceptional fidelity and peak capability
assure clean, high-impact response
Seamless integration with other M Series
models
QuickFly rigging system simplifies use in
flown or ground-stacked arrays
54.00" w x 14.47" h x 22.00" d
(1372 mm x 368 mm x 559 mm)
235 lbs (106.60 kg)
Multi-ply hardwood
Black textured
Powder-coated hex-stamped steel
MRF-MILO rigging frame, custom AlignaLink
connectors and quick release pins
Dimensions
Weight
Enclosure
Finish
Protective Grille
Rigging
�
�
�
�
�
�
�
�
�
�