Installation Manual

3.7.2Checks After Start-up

After initial start-up of the system, normal operation should be tested. At the minimum, the following tests should be performed (refer to the EPS 7000 Users Manual for procedures), as applicable to your installation:

◗Emergency power off (EPO) test.

◗Remote emergency power off (REPO) test (if applicable).

◗Inverter start and stop.

◗Battery transfer test.

◗Maintenance bypass procedure.

3.8Shutdown

Shutdown procedures in this section apply to the EPS 7000 cabinet under normal, emergency, overload, and mainte- nance conditions.

Installation

page 3 — 7