2.Make sure that the SCSI ID of the SCSI device is set properly. It must be from 0 to 6. ID 7 is reserved for the FR1SX. SCSI ID is usually set with a switch on the back of the SCSI device. For more information how to set SCSI ID, refer to the SCSI device’s manual.

3.Attach an active terminator to the SCSI device, as Fig.3 shows. If the SCSI device has an internal terminator instead of external terminator, it must be enabled.

4.Turn ON the SCSI device and check if the green LED on the FR1SX is lit. If the green LED is not lit, the SCSI device doesn’t have Term-Power output capability. If the SCSI device doesn’t have this capability, an optional AC Adapter is needed. Regarding optional items, refer to Chapter 8.

6