5-2. Updating firmware on Mac OS X

The FR1 Utility for Mac OS X doesn’t need installation. You can directly launch it from CD-ROM. Before using this utility, it must be enabled.

Caution: If the utility is enabled, all the firewire devices connected to the system WILLNOTWORK temporally. If the MacOS X is booted from firewire hard drive, do not enable the FR1 Utility.

1.Click Enable FR1 Utility button and restart the system.

2.Click a small button at the left of Select firmware data. Specify the firmware data on the next window and click Open.

3.Click Start Firmware update but- ton.

38