7-4. When the green power LED does not come on
Check the following points:
1.Make sure the SCSI device is powered on properly.
2.Turn off the SCSI device and check the FR1SX is attached firmly. And turn on the device again.
If the LED does not come on even if above checking was made, refer to the user’s manual of the SCSI device. SCSI specifications require Term-Power output capability as an optional, but some SCSI devices such as iomega Zip drive may not be implemented this capability. If your SCSI device does not have this Term-Power output capability, you have to connect an OPTIONAL AC adapter(sold separately) as Fig.7 shows. Regarding optional items, refer to Chapter 8.
Optional AC adapter | AC adapter jack |
|
Fig. 7
