2 Specification
2.4 CF card ACCESS switch specification
17
FX3U-CF-ADP User's Manual
1
Introduction
2
Specification
3
System
Configuration
4
Installation
5
Wiring
6
Functions
7
Before
Programming
8
CF-ADP Applied
Instructions
Explanation
9
Program
Examples
10
Troubleshooting
2.4 CF card ACCESS switch specification
*1. Turn OFF the CF card ACCESS switch, and then confirm that the BUFFER LED and ACCESS LED
are completely OFF before removing the CompactFlashTM card or turning OFF the power of the CF-
ADP.
2.5 CompactFlashTM card specification
2.6 Applicable CompactFlashTM card
The following CompactFlashTM card are applicable for the CF-ADP.
Caution
The life of a CompactFlashTM card is expired when data is written to it a specified number of times.
Generally, at the end of the operational life, the CompactFlashTM card has reduced capabilities.
Please use it ensuring sufficient availability.
Setting item Description
ON Access to the CompactFlashTM card enabled
OFF*1 Access to the CompactFlashTM card disabled
Item Specification
Operating ambient humidity 5 to 95%RH (no condensation)
Power supply voltage 3.3V 150mA or less
Connector shape Type I
Format form FAT16
(The CompactFlashTM card shall be formatted in accordance with the FAT16 in advance.)
Data capacity 2GB or less
Connector terminal Gilding
No. of installable cards 1
Model Description
CompactFlashTM card
GT05-MEM-128MC Flash ROM 128MB
GT05-MEM-256MC Flash ROM 256MB
GT05-MEM-512MC Flash ROM 512MB
GT05-MEM-1GC Flash ROM 1GB
GT05-MEM-2GC Flash ROM 2GB