8 CF-ADP Applied Instructions Explanation
8.7 FNC 304 - FLCMD / FX3U-CF-ADP command
75
FX3U-CF-ADP User's Manual
1
Introduction
2
Specification
3
System
Configuration
4
Installation
5
Wiring
6
Functions
7
Before
Programming
8
CF-ADP Applied
Instructions
Explanation
9
Program
Examples
10
Troubleshooting
8.7.1 Detailed explanation of setting data
Details of the setting data in the FLCMD instruction are as shown below.
*1. The CompactFlashTM card is available in the "mounted" status.
*2. The CompactFlashTM card is unavailable in the "unmounted" status.
Program Example
1) Program Example 1
When X000 turns ON, the data (saved in the file whose ID is "1") stored in the buffer inside the CF-ADP is
forcibly written to the CompactFlashTM card.
Channel number 1 is used.
2) Program Example 2
When X000 turns ON, the CompactFlashTM card is set to the mounted status.
Channel number 1 is used.
3) Program Example 3
When X000 turns ON, error codes stored in the CF-ADP are cleared.
Channel number 1 is used.
Setting items Description Data Type
Contents of instruction for operation
K-1 : Forcibly writes all buffered data to the CompactFlashTM card.
K0 to K63 : Forcibly writes the buffered data of the specified file ID to the CompactFlashTM
card.
K256(H100) : Sets the CompactFlashTM card to the mounted status*1.
K512(H200) : Sets the CompactFlashTM card to the unmounted status*2.
K1280(H500) : Clears error codes stored in the CF-ADP.
16-bit binary
nChannel number used by the CF-ADP
K1 : ch1
K2 : ch2 16-bit binary
S
X000 M0SET
M0 FNC304
FLCMD K1 K1
M8329
Abnormal end M0RST
M8029
Execution completion M0RST
X000 M0SET
M0 FNC304
FLCMD H100 K1
M8329
Abnormal end M0RST
M8029
Execution completion M0RST
X000
M0SET
M0
FNC304
FLCMD H500 K1
M8329
Abnormal end
M0RST
M8029
Execution
completion
M0RST