Mitsubishi Electronics MR-J2S- A

5 - 11

5. PARAMETERS

Class No. Symbol Name and function Initial

value Unit Setting

range

Control

mode

Basic parameters

17 MOD Analog monitor output

Used to selection the sig nal provided to the analog moni tor (MO1)

analog monitor (MO2) output. (Refer to section 5.2.2)

Setting

Analog monitor (MO2)

Servo motor speed ( 8V/max. speed)

1 Torque ( 8V/max. torque) (Note)

2 Motor speed ( 8V/max. speed)

3 Torque ( 8V/max. torque) (Note)

4 Current command ( 8V/max. current command)

5 Command pulse frequency ( 10V/500kpulse/s)

6 Droop pulses ( 10V/128 pulses)

7 Droop pulses ( 10V/2048 pulses)

8 Droop pulses ( 10V/8192 pulses)

9 Droop pulses ( 10V/32768 pulses)

A Droop pulses ( 10V/131072 pulses)

B Bus voltage ( 8V/400V)

Analog monitor (MO1)

Note. 8V is outputted at the maximum torque.

However, when parameter No.28 76 are

set to limit torque, 8V is outputted at the torque highly

limited.

0100 Refer to

Name

and

function

column.

P S T