A - 6
(6) Maintenance, inspection and parts replacement
CAUTION
With age, the electrolytic capacitor of the s ervo amplifier will deteriorate. To prevent a secondary acc ident
due to a fault, it is recommended to r eplace the electrolytic capacitor every 10 years whe n used in general
environment.
Please consult our sales represent ative.
(7) General instruction
To illustrate details, the equipment in th e diagrams of this Specifications and Instruction Manua l may have
been drawn without covers and safety guards. W hen the equipment is operated, the covers and safety
guards must be installed as specified . Operation must be performed in accordance with this Specifications
and Instruction Manual.
About processing of waste
When you discard servo amplifier, a b attery (primary battery), and other option articl es, please follow the law of
each country (area).
FOR MAXIMUM SAFETY
These products have been manufacture d as a general-purpose part for general industr ies, and have not
been designed or manufactured to be incorporate d in a device or system used in purposes related to
human life.
Before using the products for specia l purposes such as nuclear power, electric po wer, aerospace,
medicine, passenger movement vehicles or underwater relays, contact Mitsubishi.
These products have been manufacture d under strict quality control. However, when installing the product
where major accidents or losses could occur if the product fails, install appropri ate backup or failsafe
functions in the system.
EEP-ROM life
The number of write times to the EEP-RO M, which stores parameter settings, etc., is lim ited to 100,000. If
the total number of the following op erations exceeds 100,000, the servo amplifier and/or converter unit may
fail when the EEP-ROM reaches the e nd of its useful life.
Write to the EEP-ROM due to parameter setting changes
Home position setting in the absol ute position detection system
Write to the EEP-ROM due to device changes
Write to the EEP-ROM due to point tab le changes
PRECAUTIONS FOR CHOOSING THE PRODUCTS
Mitsubishi will not be held liable for damage caused by factors found not to be the c ause of Mitsubishi;
machine damage or lost profits caused by faults in the Mitsubishi products; damage, s econdary damage,
accident compensation caused by spec ial factors unpredictable by Mitsubishi; damag es to products other
than Mitsubishi products; and to other duties.