8 - 26
8.3 Remote Password
This section provides the list of parameters for use of remote password and desc ribes parameter details.
A remote password is set for an Ethernet module, serial communication module, modem interface module,
or Built-in Ethernet port QCPU.
Figure 8.19 Remote password settings dialog box
Table8.21 Remote password setting list
Item Parameter No. Description Setting range Default Reference
Password settings - Enter a remote password.
Four characters or less
(alphanumeric characters, special
symbols)
-
•QnUDE(H)CPU:
QnUCPU User's
Manual
(Communication
via Built-in
Ethernet Port)
• QJ71E71:
Ethernet module
manual
• QJ71C24:
Serial
communication
module manual
•QJ7 1CMO:
Modem interface
module manual
Password
active
module
settings
Model
name -
Select a model name of the module
for which the remote password set
to the CPU module is checked.
•QnUDE(H)CPU
•QJ 71E71
•QJ 71C24/CMO
-
Start XY -
Set the start address of the module
for which the remote password is
checked.
0000H to 0FE0H-
Detail - Set details of the remote password
for the QJ71E71. --
User connection No. - Select user connection No. Connection 1 to Connection 16 -
System connection - Select a valid port of the remote
password for system connection.
Specify a valid port of the remote
password.
•Aut o open UDP port
•FTP tr ansmission port (TCP/IP)
•GX De veloper transmission port
(TCP/IP)
•GX De veloper transmission port
(UDP/IP), Dedicated instruction,
CC IE Control, MNET/10(H) relay
transmission port.
•HTTP port
-