10 - 10
(7) Service processing time
Service processing is the communication processing with GX Develope r and external devices.
When monitoring device data, reading programs, and setting monitor co nditions in GX Developer, the
processing time shown in Table10.13 or Table10.14 is required.
*1: The time in the table is for the case where the service processing count is set to one.
(8) Common processing time
The CPU module performs common processing by the system. The common processing time shown in
Table10.15 is required.
(9) Multiple CPU high speed transmission processing time
This is the processing time required for data tran smission between the CPU modules when the mul tiple CPU high
speed transmission function is used.
For the multiple CPU high speed transmission processing time, refer to the following.
QCPU User's Manual (Multiple CPU System)
Table10.13 Processing time to monitor device data and read programs
CPU module
Processing time*1
Monitoring device
data (Data register: 32
points)
Reading programs
(10K step)
Q00UJCPU, Q00UCPU, Q01UCPU 1.60ms 3.70ms
Q02UCPU 1.00ms 1.55ms
Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU, Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU,
Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU
0.35ms 0.95ms
Table10.14 Processing time to set monitor conditions
CPU module
Processing time
Specified step match Specified device
match
Q02UCPU 0.03ms 0.04ms
Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU, Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU,
Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU
0.01ms 0.03ms
Table10.15 Common processing time
CPU module Processing time
Q00UJCPU, Q00UCPU, Q01UCPU 0.25ms
Q02UCPU 0.17ms
Q03UDCPU 0.12ms
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU, Q20UDHCPU,
Q26UDHCPU 0.09ms
Q03UDECPU 0.21ms
Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU, Q13UDEHCPU,
Q20UDEHCPU, Q26UDEHCPU 0.17ms