7-217
ESTR(P)
1
2
3
4
6
6
7
8
7.11 Character string processing instructions
7.11.11 Conversion from floating decimal point to character string data (ESTR(P))
7.11.11 Conversion from floating decimal point to character string
data (ESTR(P))
ESTR(P)
*1:Available only in multiple Universal model QCPU
Function
(1) Converts the 32-bit floating decimal point data designated by to a character string
according to the display designation specified by , and stores the result into the area
starting from the device number designated by .
(2) The post-conversion data differs depending on the display designation designated by .
Basic model QCPU: The upper five digits of the serial No. are "04122" or larger.
:
32-bit floating decimal point data to be converted or head number of the devices where the data is stored
(real number)
:
Head number of the devices where display designation for the numerical value to be converted is stored (BIN 16 bits)
: Head number of the devices where the converted character string will be stored (character string)
Setting
Data
Internal Devices R, ZR J\ U\G Zn Constants
EOther
Bit Word Bit Word
–– –– *1 ––
–– –– –– –– –– ––
–– –– –– –– –– ––
Process
High
performance
Redundant
Universal
Ver.
Basic
Command
Command
ESTRP
ESTRP
ESTRESTRD
D
S2
S2
S
S1
S1
S2
D
S1
S2
D
S1
S2
D
S2
1: Exponent format
Total number of digits
+1
0: Decimal point format
Number of digits in decimal fraction
+2
Setting is possible in the range from 2 to 24.
S2
S2
S2
The converted data differs depending
on the format selected at .
S2
When using decimal point format