E-26
STATUS
STANDBY
MENU
DUAL COLOR
MODE
Freezing a Moving Picture
This function is used to stop and view a moving picture. Note that the input
image continues to advance even though the picture there is a still picture
condition.
A press of the FREEZE button changes the screen to a still picture. A
further press returns the screen to a moving picture.
General Operation
MUTELAMP MODE AUTO
ASPECT
TIMER
VOL KSTN ZOOM
234
FREEZE
1
Cancelling Video and Audio Temporarily
This function is used to cancel the video and audio at the same time.
A press of the MUTE button will blank the picture and the sound, and
the screen will take on the background color that has been set.
Another press will cause a return to the original conditions.
FREEZE LAMP MODEAUTO
ASPECT
TIMER
VOL KSTN ZOOM
134
MUTE
2
Lamp Mode
FREEZE LAMP MODEAUTO
ASPECT
TIMER
VOL KSTN ZOOM
14
MUTE
23
Use this if the picture is projected on a small screen and the picture
is too bright or when projecting images in dark rooms.
Pressing the LAMP MODE button will set the lamp mode.
Low (STATUS indicator is lit green)
The lamp’s brightness is reduced to approximately 80%, extending the
lamp’s service life.
Normal (STATUS indicator is off)
The lamp brightness is set to 100% and the screen is bright.
Note:
Frequent switching this mode can degrade the lamp.
STATUS
STANDBY
MENU
DUAL COLOR
MODE
STATUS indicator
Selection of the Color Mode (DCM)
Select the preset color mode.
Pressing the DUAL COLOR MODE button of the projector switches the
color mode.
Each time the DUAL COLOR MODE button is pressed, the screen will be
black for approximately 3 seconds and then a message indicating the
switched color mode will be displayed for approximately 1.5 seconds.
Dynamic..... Select this to prioritize brightness.
Vivid........... Select this to prioritize color.
DUAL COLOR MODE button