6

F

Variable steam
Fill the iron with water as
described in ‘Filling’, page
5, and insert the plug into
the electrical socket.
The steam output can be varied
from low to high by moving the
variable steam control. When
using the iron at the bottom of
the steam range, the steam
output should be adjusted to
the low setting.
The steam facility should only
be used on garments which are
suitable for ironing at 2, 3-dot
and MAX setting.
Economy / Eco steamsetting
(certain models only) E
This iron provides you with two
specific steam levels, the first
position is an economy or “Eco”
setting which delivers a specific
amount of steam adequate for
most tasks. Move the control
button across until it aligns with
the green indicator line. A
second setting is available to
handle difficult jobs such as
stubborn creases. The “Eco” or
economy setting can be used at
the 2-3 dot and MAX
temperature levels, high steam
is suitable for 3-dot and MAX
levels only.
Steam boost F
Press the steam boost
button ¤to obtain a boost
of extra steam for ironing
out creases in heavy
material such as denim etc.
The shot of steam can be used
whilst dry ironing, providing
there is water in the tank, and
the temperature control is set
within the steam range.
Do not use shot of steam at
temperatures below the steam
range shown on the control dial.
Note: For optimum steam
quality, do not operate the shot
more than three times in
succession.
Vertical steam
Hold the iron in a vertical
position between 1cm and 2cm
away from the item G. Press
the steam boost button ¤, this
will create vertical steam. This
feature is especially useful for
removing creases from hanging
clothes, curtains, wall hangings,
etc.
Note; For optimum steam
quality, do not operate the shot
more than three times in
succession.
No drip system
Your iron is fitted with a no drip
system which is designed to
prevent water escaping from the
soleplate fl when the iron is too
cold.
During use, the no drip system
may emit a loud click,
particularly during heat-up or
whilst cooling down. This is
perfectly normal and indicates
that the system is functioning
correctly.
Auto shut-off
(certain models only)
If your iron is fitted with the auto
shut-off function, it will
automatically shut down after a
set period.
If the iron is left unattended in
the horizontal position, it will
shut down after 1 minute.
If it is left in the vertical position,
it will shut down after 8 minutes.
The auto shut-off light Âwill
flash, indicating the product is in
shut-down mode, and will be
accompanied by an intermittent
beep sound.
To reactivate the iron, gently
shake it, the temperature
indicator light will come on,
indicating the iron is warming
up. Wait for the iron to heat-up
as normal.

UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119

G

¤

E

Off / No steam
Economy / Eco steam setting
High steam setting
RN40850 MUK Rev2:RN40850 MUK Rev2 19/03/2010 09:37 Page 6