Chapter 2: Device Installation

VMM6300 and VMM7300 Assembly Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

The VMM external connection points are shown and labeled in the figure below.

Figure 2-2 VMM External Connection Points

Power

Power Reset

Connector

Ethernet

(Crossover MDI-X)

Installing the VMM Device

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

N-Type

Antenna

Connector

The following instructions describe the VMM6300 and VMM7300 hardware installation procedure:

Procedure 2-1 VMM Hardware Installation Procedure

1Mount the VMM device in a suitable location in a vehicle to allow for ventilation.

The device is not waterproof and should be reasonably protected from moisture and other exposed outdoor environments.

2Connect the antenna to the N-type connector.

6881011Y54-A September 2005

2-4