Getting Started
14
English
GETTING STARTED

Attaching the Side Connector Cover

TURNING THE RADIO ON OR OFF
1
Place the loop (attached to the side connector
cover) over the antenna; then slide it
downward until it touches the top of the radio.
2
Insert the tab on the top of the cover into the
slot above the connector.
3
Position the cover over the connector and
align the thumbscrew with the threaded hole
in the radio.
4
Tighten the thumbscrew to hold the cover in
place.
Do not overtighten the thumbscrew
.

Loop

Slot

Thumbscrew

Antenna

ON OFF
Turn the
On/Off/
Volume Control
knob
clockwise.
If power-up is suc-
cessful, you will hear
the Self-Test Pass
Tone
and see the LED turn
green.
If the radio fails to
power up, you will
hear the Self-Test
Fail Tone .
Turn the
On/Off/
Volume Control
knob counterclock-
wise until you hear a
click.
#WarisN/APopUser.book Page 14 Tuesday, November 3, 1998 2:08 PM