6-1
Chapter 6 RS-232 Interface
Introduction
This chapter covers RS-232 host information for setting up your scanner. The RS-232
interface is used to attach the scanner to point-of-sale devices, host computers, or other
devices with an available RS-232 port (e.g., com port).
Note:: This scanner utilizes TTL RS-232 signal levels, which will interface
with most system architectures. For system architectures requiring
RS-232C signal levels, Motorola offers different cables providing the
TTL to RS-232C conversion. Contact the Global Customer
Interaction Center for more information.
If your particular host is not listed in Table 6-2, you need to set the communication
parameters to match your host device. To set communication parameters for hosts not
listed, refer to the documentation for the host device.